We Offer EN Series |Single Station Bi-Axial Rotomoulding Machine - By Vinodrai

EN- Series Single Station Bi-Axial Machine

Enterprise series machines are single station bi-axial range specially developed for startup entrepreneurs. Highly suitable for low and medium production of water storage tanks. Fuel efficient, low horsepower, low foot print, minimum maintenance & economic production.

Dream Machines for water storage tank manufacturers

Available Models:
EN-1000 | EN-1000 x 2 | EN-1000 x 4 | EN-1500 x 2 | EN-2000 | EN-2000 x 2 | EN-2000 x 2 SP | EN-2500 | EN-3000

Vinodrai’s EN series machine range was a pioneering effort in creating enterprise grade machine sufficient in itself to begin a new water tank manufacturing plant. Vinodrai also was the first in the industry to introduce a single station machine “EN 1000×2” with multi-station capabilities. EN-1000×2 is truly a multi-station capability machine which can mould two tanks of 1000 lit. at a time or four tanks of 500 lit at a time. Resulting in increased productivity at lowest ever fuel cost.

  • RAW MATERIAL : About 84 % of production cost is due to ever increasing price of LLDPE. EN 1000×2 is equipped with state of art process control, so that you can produce multilayer tanks with lowest possible weights. Quality of product is independent of skill, rejection is minimum.
  • FUEL COST : EN 1000×2 is most fuel efficient machine in its class. Fuel cost is low even while producing 1000 and 750 lit. tanks. Machine consumes less than 2.2 lit. per 1000 lit. tank. Gas Fired Model further improvises the efficiency.
  • MANPOWER COST : Operation of EN 1000×2 machine is very simple even unskilled operator manages production of multilayer tanks without any rejection.
  • OVERHEAD COST : Low initial capital investment, minimum space requirement & higher production results in minimum overheads.
  • TRANSPORTATION COST : Machine can be installed nearer to market resulting in lower cost of transportation.

Small footprint and low investment.

Machine can be installed nearer to market resulting in lower cost of transportation.

A water tank manufacturing plant in itself.

Vinodrai Offers following types of EN Series – Single Station Bi-Axial Machine

EN-1000 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-1000 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-axial rotational moulding machine.
  • One U-arm.
  • Capacity one tank of 1000 litre maximum.
  • Typical cycle time 60 min (20 min heating, 20 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 3.5 litre diesel or 2.9 kg of LPG.
  • Electric load 3.5 H.P.
  • Process temperature 210oC.
  • Production in 24 hours 20 tanks of 1000 litres.
  • (L) 3.8 mtr x (W) 3 mtr x (H) 2.3 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-1000X2 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-1000X2 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-axial rotational moulding machine.
  • One straight arm.
  • Capacity two tanks of 1000 litres or four tanks of 500 litres maximum.
  • Typical cycle time 70 min (25 min heating, 25 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 5 litre diesel or 4.2 kg of LPG.
  • Electric load 6.5 H.P.
  • Process temperature 210oC.
  • Production in 24 hours 36 tanks of 1000 litres.
  • (L) 6 mtr x (W) 3.5 mtr x (H) 4 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-1000X4 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-1000X4 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-axial rotational moulding machine.
  • One straight arm.
  • Capacity four tanks of 1000 litres maximum.
  • Typical cycle time 80 min (30 min heating, 30 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 7 litre diesel or 5.4 kg of LPG.
  • Electric load 13 H.P.
  • Process temperature 210oC.
  • Production in 24 hours 64 tanks of 1000 litres.
  • (L) 7.5 mtr x (W) 3.8 mtr x (H) 5.2 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-1500X2 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-1500X2 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-axial rotational moulding machine.
  • One straight arm.
  • Capacity two tanks of 1500 litres or four tanks of 750 litres maximum.
  • Typical cycle time 85 min (30 min heating, 30 min cooling, 25 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 8 litre diesel or 6 kg of LPG.
  • Electric load 13 H.P.
  • Process temperature 210 o C.
  • Production in 24 hours 30 tanks of 1500 litres.
  • (L) 6.5 mtr x (W) 3.5 mtr x (H) 4.7 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-2000 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-2000 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-Axial rotational moulding machine.
  • One U-arm.
  • Capacity one tank of 2000 litre maximum.
  • Typical cycle time 65 min (25 min heating, 20 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 5.5 litre diesel or 4.2 kg of LPG.
  • Electric load 10.5 H.P.
  • Process temperature 210oC.
  • Production in 24 hours 20 tanks of 2000 litres.
  • (L) 4.2 mtr x (W) 3.5 mtr x (H) 2.7 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-2000X2 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-2000X2 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-Axial rotational moulding machine.
  • One straight-arm.
  • Capacity two tanks of 2000 litres or four tanks of 1000 litres maximum.
  • Typical cycle time 80 min (30 min heating, 30 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 9 litre diesel or 6.9 kg of LPG.
  • Electric load 13 H.P.
  • Process temperature 210 oC.
  • Production in 24 hours 36 tanks of 2000 litres or 64 tanks of 1000 litres.
  • (L) 7 mtr x (W) 4.5 mtr x (H) 5 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-2000X2SP – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-2000X2SP – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-Axial rotational moulding machine.
  • One straight-arm.
  • Capacity two tanks of 2000 litres or four tanks of 1000 litres maximum or eight tanks of 500 litres.
  • Typical cycle time 85 min (35 min heating, 30 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 11 litre diesel or 8.5 kg of LPG.
  • Electric load 13 H.P.
  • Process temperature 210oC.
  • Production in 24 hours 36 tanks of 2000 litres or 64 tanks of 1000 litres.
  • (L) 7 mtr x (W) 4.5 mtr x (H) 5 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-2500 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-2500 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-Axial rotational moulding Machine.
  • One U-arm.
  • Capacity one tank of 2500 litre maximum.
  • Typical cycle time 65 min (25 min heating, 20 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 6 litre diesel or 4.6 kg of LPG.
  • Electric load 13 H.P.
  • Process temperature 210 o C.
  • Production in 24 hours 19 tanks of 2500 litres
  • (L) 4.5 mtr x (W) 4.5 mtr x (H) 3.8 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote

EN-3000 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

EN-3000 – SINGLE STATION BI-AXIAL ROTATIONAL MOULDING MACHINE

  • Single station bi-axial rotational moulding machine.
  • One U-arm.
  • Capacity one tank of 3000 litre maximum.
  • Typical cycle time 80 min (30 min heating, 30 min cooling, 20 min loading & unloading).
  • Fully automatic Italian burner, diesel or LPG or natural gas.
  • Fuel consumption cycle 7 litre diesel or 5.5 kg of LPG.
  • Electric load 13 H.P.
  • Process temperature 210oC.
  • Production in 24 hours 16 tanks of 3000 litres.
  • (L) 4.5 mtr x (W) 5 mtr x (H) 4 mtr.
EN- Series Single Station Bi-Axial Machine

Download Specification

Request for Quote